Your browser does not support JavaScript! This is neccesary for the usage of this webpage. Please either enable it, or download a modern browser, such as Chrome.
California Scientific
4011 Seaport Blvd
West Sacramento, CA 95691
Sales@CalSci.com
800-284-8112
916-372-6800

Kawasaki Concours Windshields

WH is Width High - the height just before the windshield turns in

WL is Width Low - the height at the widest part near the botton

H is Height - the overall height of the shield

RH is Relative Height - the height of the shield from the top mounting hole up

Instructions for choosing the right windshield height.
● Vented for minimum turbulence and back pressure
● Available in three heights
● Shape designed to compliment the lines of the Concours
● Excellent coverage of arms and torso
● Exceptionally quiet cockpit area, with much less noise and turbulence than stock
● No back pressure
● Made from 4.5mm thick (3/16") DOT certified impact resistant plastic
Laser cut for precision aerodynamics and fit
● Includes storage cover, micro-fiber cleaning towel, and mini-spray bottle of windshield cleaner
Installation Instructions
Watch our laser cut a windshield
All about our windshield designs
How to choose the right windshield height for you
Forum Postings on our Concours 1000 shields
Touring Shields for 1986-2006 Concours 1000 WH = 17" WL = 23"
SizePriceHRH
Concours 86-06 XLarge
$20025" = 64cm16.5" = 42cm
Concours 86-06 Large
$18523" = 59cm14.5" = 37cm
Concours 86-06 Medium
$18521.5" = 55cm13" = 33cm
Other Stuff for your Bike
Heated Grip Kit
$60Heater elements for use with your stock grips
Heated Seat Kit
$60Heater element for use with your stock seat
Two kits required to heat both rider and passenger seats
Heat Controller
$705 level controller for heated seat or grip kit
Handlebar Mitts
$30Keep your hands warm and dry
Balaclava
$9Keep your neck and chin warm
Seat Modification Kit
$25Relieve the pressure on your hip bones
Includes foam for both rider and passenger seats
● Vented for minimum turbulence and back pressure
● Available in three heights
● Shape designed to compliment the lines of the Concours
● Excellent coverage of arms and torso
● Exceptionally quiet cockpit area, with much less noise and turbulence than stock
● No back pressure
● Made from 4.5mm thick (3/16") DOT certified impact resistant plastic
Laser cut for precision aerodynamics and fit
● Includes storage cover, micro-fiber cleaning towel, and mini-spray bottle of windshield cleaner
Installation Instructions
Watch our laser cut a windshield
All about our windshield designs
How to choose the right windshield height for you
Forum Postings on our Concours 1000 shields
 Friend has a cal sci on his concours, after a ride I must have one too.
-- Stephen Shan